Showing all 10 results

APC SMART UPS -SURT20KRMRXLI (20KVA) 3 PHASE

 77,542.40

UVTP20KHS Features

Key Features

Run time for loadW

Max. Capacity Used

100%
Output power capacity

16.0kWatts / 20.0kVA
Nominal Output Voltage

400V 3PH
Nominal Input Voltage

400V 3PH
Input Connections

Hard Wire 5-wire (3PH + N + G)
Maximum Input Current

27.0A
APC Smart-UPS VT 20kVA 400V, w/Start-Up 5X8, Internal Maintenance Bypass, & Parallel Capability
UPS is supplied without batteries. 3rd party battery system must be purchased separately.
Includes: CD with software, Installation guide, Network Management Card, Power modules ship installed, User Manual
  • Parallel-capacity capable
    Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
  • Parallel-redundant capable
    Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy

Smart-UPS VT Features & Benefits

Protection

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Frequency and voltage regulation

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Cold-start capable

Provides temporary battery power when the utility power is out.

Marketing Features

Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Sustainability

EU CoC for UPS

Ensures that UPSs sold in the EU are highly efficient

Manageability

SmartSlot

Customize UPS capabilities with management cards.
InfraStruXure Manager Compatible

Enables centralized management via the APC InfraStruXure Manager.
Network manageable

Provides remote power management of the UPS over the network.
Audible alarms

Provides notification of changing utility power and UPS power conditions
LCD display

Alpha-Numeric Display which displays system parameters and alarms.
LED status indicators

Quickly understand unit and power status with visual indicators.
Programmable frequency

Ensures compatibility with different input frequencies.

Total Cost of Ownership

Input power factor correction

Minimizes installation costs by enabling the use of smaller generators and cabling.
Manual maintenance bypass

Reduces installation costs by eliminating the need for an external mechanical bypass.
Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.
Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Availability

Generator compatible

Ensures clean, uninterrupted power to protected equipment when generator power is used.
Automatic internal bypass

Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Dual mains input

Increases availability by allowing the UPS to be connected to two separate power sources.
Scalable runtime

Allows additional run time to be quickly added as needed.
Battery modules connected in parallel

Delivers higher availability through redundant batteries.

Serviceability

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Shippable with modules installed

Enables pre-installation UPS staging and testing and faster installation.
Battery replacement without tools

Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Modular design

Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Technical Specifications

Output

Max Configurable Power (Watts)

16.0kWatts / 20.0kVA
Output Voltage Note

Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Output Voltage Distortion

Less than 5% at full load
Output Frequency (sync to mains)

47 – 53 Hz for 50 Hz nominal
Output Frequency (not synced)

50Hz +/- 0.1% for 50Hz nominal
Other Output Voltages

380, 415
Load Crest Factor

3 : 1
Topology

Double Conversion Online
Waveform type

Sine wave
Maximum Output Current

32
Bypass

Built-in Maintenance Bypass, Built-in Static Bypass

Input

Input frequency

47 – 70 Hz (auto sensing)
Input voltage range for main operations

304 – 477V
Other Input Voltages

380, 415
Input Power Factor at Full Load

0.98

Batteries & Runtime

Battery type

No internal battery – uses external battery system

Communications & Management

Interface Port(s)

DB-9 RS-232, SmartSlot
Pre-Installed SmartSlot™ Cards

Control panel

Multi-function LCD status and control console
Audible Alarm

Audible and visible alarms prioritized by severity
Emergency Power Off (EPO)

Yes

Physical

Maximum Height

823MM, 82.3CM
Maximum Width

352MM, 35.2CM
Maximum Depth

813MM, 81.3CM
Net Weight

134.0KG
Shipping weight

173.0KG
Shipping Height

1290MM, 129.0CM
Shipping Width

720MM, 72.0CM
Shipping Depth

1110MM, 111.0CM
Color

Black

Conformance

Approvals

C-tick, CE, EN 50091-2, EN 61000-3-2, EN 61000-3-3, EN/IEC 62040-3, ISO 14001, ISO 9001, RCM, VFI-SS-111

APC UPS SMART -SRV3000 (3KVA SMART)

 6,924.56

Technical Specifications

Output

Max Configurable Power (Watts)

2.7kWatts / 3.0kVA
Output Voltage Note

Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion

Less than 5% at full load
Output Frequency (sync to mains)

47 – 53 Hz for 50 Hz nominal, 57 – 63 Hz for 60 Hz nominal
Topology

Line Interactive
Waveform type

Sine wave
Transfer Time

2ms typical

Input

Input frequency

50/60 Hz +/- 3 Hz (auto sensing)
Input voltage range for main operations

160 – 286V
Input voltage adjustable range for mains operation

151 – 302V
Number of Power Cords

1
Other Input Voltages

220, 240

Batteries & Runtime

Battery type

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time

3hour(s)
Replacement Battery

Expected Battery Life (years)

3 – 5
RBC Quantity

1
Battery Charge Power (Watts)

271Watts
Extendable Run Time

1
Battery Volt-Amp-Hour Capacity

816

Communications & Management

Interface Port(s)

SmartSlot, USB
Control panel

Multi-function LCD status and control console
Audible Alarm

Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO)

Yes
Available SmartSlot™ Interface Quantity

1

Surge Protection and Filtering

Surge energy rating

365Joules
Filtering

Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Physical

Maximum Height

435MM, 43.5CM
Maximum Width

197MM, 19.7CM
Maximum Depth

544MM, 54.4CM
Net Weight

52.5KG
Shipping weight

63.7KG
Shipping Height

699MM, 69.9CM
Shipping Width

381MM, 38.1CM
Shipping Depth

762MM, 76.2CM
Color

Black
Units per Pallet

9.0

Environmental

Operating Temperature

0 – 40 °C
Operating Relative Humidity

0 – 95 %
Operating Elevation

0-3000meters
Storage Temperature

-15 – 45 °C
Storage Relative Humidity

0 – 95 %
Storage Elevation

0-15000meters
Audible noise at 1 meter from surface of unit

53.0dBA
Online thermal dissipation

375.0BTU/hr

APC UPS SMART SMC1000I (1000VA-1KVA)

 2,828.80
SPECIFICATIONS

Output

  • Output power capacity: 600 Watts / 1.0 kVA
  • Max Configurable Power (Watts): 600 Watts / 1.0 kVA
  • Nominal Output Voltage: 230V
  • Output Voltage Distortion: Less than 5% at full load
  • Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
  • Waveform type: Sine wave

Input

  • Nominal Input Voltage: 230V
  • Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
  • Input Connections: IEC-320 C14
  • Input voltage range: 180 – 287 V
  • Other Iutput Voltages: 220, 240

Batteries & Runtime

  • Battery Volt-Amp-Hour Capacity: 170
  • Typical recharge time: 3 hour(s)
  • Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Communications & Management

  • Interface Ports: USB
  • Control panel: Multi-function LCD status and control console
  • Audible Alarm: Alarm when on battery, distinctive low battery alarm, configurable delays
  • Emergency Power Off (EPO): no

Surge Protection and Filtering

  • Surge energy rating: 455 Joules
KEY FEATURES
  • Output power capacity: 600 Watts / 1.0 kVA
  • Nominal Input Voltage: 230V
  • Interface Ports: USB
  • Battery Volt-Amp-Hour Capacity: 170
  • Typical recharge time: 3 hour(s)

APC UPS BACKUP 650VA-BX650VA

 918.56

BX650CI Features

Key Features

Run time for loadW

1m
Max. Capacity Used: 100%
Output power capacity: 390Watts / 650VA

Output Connections:

(4) IEC 320 C13 (Battery Backup)
(1) IEC Jumpers (Battery Backup)
Nominal Output Voltage: 230V
Nominal Input Voltage: 230V
Input Connections: IEC-320 C14
Cord Length: 1.16meters
Maximum Input Current: 7.0A
APC Back-UPS 650, 230V [NEW MODEL AVAILABLE, BX700UI]
Battery Backup & Surge Protector for Electronics and Computers
Includes: Qty 1 – Detachable 1.2 m IEC power cord, User Manual
  • Audible alarms
    Provides notification of changing utility power and UPS power conditions
  • Automatic Voltage Regulation (AVR)
    Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
  • Battery failure notification
    Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Cold-start capable
    Provides temporary battery power when the utility power is out.
  • Disconnected battery notification
    Warns when a battery is not available to provide backup power.
  • Intelligent battery management
    Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Resettable circuit breaker
    Easy recovery from overloads; no need to replace a fuse.

APC SMART UPS SMT 2200 (2.2KVA SMART)

 6,531.20

Item specifics

Condition:
Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by … Read more
Model:

SUA2200

Non-Domestic Product: No Modified Item: No
Voltage Compatibility: 120V MPN:

Does Not Apply

Max. Voltage-Amps: 2200VA Custom Bundle: No
Type: Desktop/Freestanding UPS Outlets: 10
Max. Wattage: 1980 Brand:

APC

APC SMART UPS- SRV 2000I (2000VA-2KVA)

 4,399.20
Output
Output Power Capacity
1300 Watts / 2000 VA
Max Configurable Power (Watts)
1300 Watts / 2000 VA
Nominal Output Voltage
230V
Output Voltage Distortion
Less than 5% at full load
Output Frequency (sync to mains)
50 Hz
Line Interactive
Waveform Type
Sine wave
Output Connections
(1) IEC 320 C19 (Battery Backup) , (6) IEC 320 C13 (Battery Backup)
Input
Nominal Input Voltage
230V
Input Frequency
47 – 63 Hz
Input Connections
IEC-320 C20
Input voltage range for main operations
180 – 287 V
Input voltage adjustable range for mains operation
170 – 300V
Other Input Voltages
220 , 240
Batteries & Runtime
Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time
3 hour(s)
Replacement Battery
APCRBC148
RBC Quantity
1
 
Interface Port(s)
USB
Control panel
Multi-function LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO)
Surge Protection and Filtering
Surge energy rating
300 Joules
Filtering
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Physical
Maximum Height
216.0 mm
Maximum Width
170.0 mm
Maximum Depth
440.0 mm
Net Weight
27.5 kg
Shipping Weight
30.0 kg
Shipping Height
330.0 mm
Shipping Width
370.0 mm
Shipping Depth
590.0 mm
Color
Black
Units per Pallet
24.0
Environmental
Operating Environment
0 – 40 °C
Operating Relative Humidity
0 – 95 %
Operating Elevation
0-3000 meters
Storage Temperature
-15 – 45 °C
Storage Relative Humidity
0 – 95 %
Storage Elevation
0-15000 meters
Audible noise at 1 meter from surface of unit
45.000 dB
Online Thermal Dissipation
135.000 BTU/hr

APC UPS SMART – SMC1500I ( 1500VA-1.5KVA)

 3,494.40

Product Information

  • Protect critical data with this backup system that supplies reliable, network-grade power to your equipment. Alpha/numeric LCD interface provides clear status information and features easy-to-use navigation keys to make operation simple.

Product Identifiers

  • Brand : APC
  • MPN: SMT1500
  • UPC: 0731304268666
  • Model: SMT1500
  • eBay Product ID (ePID): 129702803

Product Key Features

  • Surge Energy Capacity: 459 J
  • Number of Outlets: 8

Additional Product Features

  • Voltage Compatibility: 120V, 1440VA
  • Type: Desktop/Free-Standing UPS

APC Back-UPS 950VA

 1,148.21
  • Battery Backup & Surge Protector for Electronics and Computers

  • Includes: Qty 1 – Detachable 1.2 m IEC power cord, Qty 1 – Detachable 2.0 m NEMA 5-15P to IEC C13 power cord, User Manua

APC Back-UPS 700VA, 230V, AVR, IEC Sockets

 942.12
  • Battery Backup & Surge Protector for Electronics and Computers

  • Includes: User Manual

APC Back-UPS 1400VA

 1,648.71
  • Battery Backup & Surge Protector for Electronics and Computers

  • Includes: Qty 1 – Detachable 1.8 m IEC power cord, Qty 1 – Detachable 2.0 m NEMA 5-15P to IEC C13 power cord, User Manual, Warranty card